O2 | Vodafone | Three + Vendors-Voice and Data
The Mini Dual bands 900/2100MHz is approved for all GSM voice calls and all 3G voice and data downloads and uploads in the UK. Those on Vodafone/O2 Networks and their Resellers like Tesco / lycra / giffgaff mobiles in the UK will enjoy the benefit of calls and text with this booster. And those looking to improve their 3G signal for both voice and data on the 2100mhz frequency will also benefit from this Booster with improving signals coverage of up to 250 Sqm2. This Dual-band booster have been tested to boost and improve signal coverage effectively in small homes, offices, and cabins.
- ALL UK 3G VOICE AND DATA
- VODAFONE AND O2 VOICE CALLS AND TEXT
- COVERAGE UP TO 250 SQM
- SUPPORTS UP TO 25 SIMULTANEOUS USERS
- 250 SQUARE METERS COVERAGE AREA
- MGC – DIGITALLY CONTROLLED IN 1DB STEPS
- ALC & AGC – 0 TO 30 DB
- UPGRADED GAIN LEVEL 60/65DB
- RSSI SIGNAL STRENGTH INDICATOR
- OSCILLATION ALARM SUPPORTS
- 10~25 SIMULTANEOUS USERS
- DURABLE INDUSTRIAL DESIGN
- HIDDEN MOUNTING BRACKET
- CE 0700 APPROVED LEGAL TO USE
- 15-DAY MONEY BACK GUARANTEE
- 3 YEARS GUARANTEE
Setting Up Your Booster
Our Mini Dual bands’ booster is quite easy to set up, it is basically a plug and play device. The package comes with a Signal Booster, Outdoor and Indoor antennas, 10 metres coax cable, a power supply and an easy to use instructions manual.
If you are in an extremely weak signal location, you will need to buy a stronger unit like the Dual bands PRO. Firstly you will need to figure out a position in the roof where you can locate a good signal, it doesn’t have to be a full bar with our boosters 1-2 bars is enough for us to amplify and do the magic.
Once this location is figured out, position the Outdoor antenna if possible facing the general direction of the network mast. Do not point directly at this mast as it may cause interference and overload the booster.
Connect one end of the coax cable to the external antenna and the other end to the outdoor port of the booster. The position of the booster is entirely up to you we however recommend it should be secure inside the building with a minimum distance of 10 metre away from the outdoor antenna.
Once this is done, you then connect the indoor antenna to the mobile port on the Booster securely. Plug in the power supply cord and switch your booster on. You should begin to notice an increase in the bars on your mobile phone.
If the result you get is not what you anticipated please do not hesitate to give us a call as we are here to help.
What’s Included In The Box
- 1 x WB Mini GSM 1800 Mobile booster
- 1 x Outdoor Panel Antenna
- 1 x 10-meter Coaxial Cable
- 1 x AC/DC Power Supply
- 1 x Indoor Antenna
- 1 x Easy to work Installation Manual
|Power||UL Max 19dBm
DL Max 18dBm
|Frequency||GSM900: UL 890~915MHz DL 935~960MHz
GSM1800: UL 1920~1990MHz DL 2110~2180MHz
|Ripple in Band||≦ 5dB|
|Spurious Emission||≦ -30dBm ~ -36dBm|
|Max Noise Figure||≦ 6dB|
|Return Loss||≦ 3dB|
|Time Delay||≦ 0.5μs|
|Power Supply||AC100~240V 50~60Hz / DC12V 2A (Included)|
|Power Consumption||< 10 Watt|
|Connector||N-Female as standard|
|Cooling||Heatsink convection cooling|
|Environment Conditions||IP 40|
|Operating Temperature||10°C – 60°C|