Input:
100–240V AC, 50/60Hz (worldwide voltage support)
Output:
12V DC, 1.5A or 2A (depending on model)
This allows it to convert standard AC power from a wall outlet into the DC voltage required by the HiBoost signal booster. The wide input range also makes it compatible for international use.
Key Benefits of a Site Survey
- Minimise Cost of Equipment & Installation
- Accurate Signal Strength Measurements
- Confirm Cabling Access & Feasibility
- Receive Free System Drawings & Schematics
- Detect Possible Interference Sources
- Full band (698-2700 MHz)
- Retransmits signal in 2 directions
- Easy to install
- Meets the international technical standards
This 2-way splitter is compatible with all Wave boosters repeaters.
- Full band (698-2700 MHz)
- Retransmits signal in 3 directions
- Easy to install
- Meets the international technical standards
- Full band (698-2700 MHz)
- Retransmits signal in 4 directions
- Easy to install
- Meets the UK and international technical standards
The Coaxial cable is crafted from a combination of superior material to stand even higher temperature, this gives the coaxial cable the ability to stand the test of time.
WB -CRIMP TOOL has the ability to professionally crimp the N-type male crimp connectors.
The Coax Prep Tool when used with the Crimp tool can perfectly terminate the ends on Coax cable with the required connectors.
Compatible with all UK Frequencies LITE 800MHZ 900MHz, DCS 1800MHz, 3G UMTS 2100MHz, and /2600MHz, any three of these frequencies can be combined to boost through one indoor antenna instead of each antenna serving each frequency thus reducing the numbers of antenna installed in a building.
Surge Rating: 18 kA
Frequency Range: DC to 6000MHz
VSWR < 1.1 to 1.1:4
Insertion Loss < 0.1 to 0.3 dB
Max Power Rating 200W Rep
Dimensions 68 x 21 x 33 mm
Frequency Range 698-806/806-960/1710-2700MHz
Gain 2.2±0.5/3.5±0.5/4.5±1.0
Polarization Horizontal
Networks: All Networks voice and data
Frequency Range 300-698-806/806-960/1710-2700-600 MHz
Gain 2.2±0.5/3.5±0.5/5.5±1.0
Angle: 360 º
Contact resistance:
inner conductor ≤ 3mΩ
outer conductor ≤ 2.5mΩ
Insulation resistance ≥5000 MΩ
Medium withstand voltage 1000V
The Crimp connector is designed for use with the standard 400 LMR coax cable.
This antenna is compatible with all UK Networks operating on the frequency range 824-960 / 1710-2700MHz.
- 1
- 2