AVAILABILITY: In stock
- 800/2600 MHZ
- ALL 4G VOICE & DATA
- UP TO 250 SQUARE METERS COVERAGE AREA
- MGC – DIGITALLY CONTROLLED IN 1DB STEPS
- ALL UK EGSM/DCS VOICE CALLS
- 4G LITE EE NETWORKS
- 250 SQUARE METERS COVERAGE AREA
- MGC – DIGITALLY CONTROLLED IN 1DB STEPS
AVAILABILITY: In stock
- Full band (698-2700 MHz)
- Retransmits signal in 2 directions
- Easy to install
- Meets the international technical standards
This 2-way splitter is compatible with all Wave boosters repeaters.
AVAILABILITY: In stock
- Full band (698-2700 MHz)
- Retransmits signal in 3 directions
- Easy to install
- Meets the international technical standards
AVAILABILITY: In stock
- Full band (698-2700 MHz)
- Retransmits signal in 4 directions
- Easy to install
- Meets the UK and international technical standards
Frequency: 800/900/1800/2100/2600 MHz
Networks : All Networks in the UK and worldwide
Plug and Play Device
The Coaxial cable is crafted from a combination of superior material to stand even higher temperature, this gives the coaxial cable the ability to stand the test of time.
WB -CRIMP TOOL has the ability to professionally crimp the N-type male crimp connectors.
The Coax Prep Tool when used with the Crimp tool can perfectly terminate the ends on Coax cable with the required connectors.
AVAILABILITY: In stock
Compatible with all UK Frequencies LITE 800MHZ 900MHz, DCS 1800MHz, 3G UMTS 2100MHz, and /2600MHz, any three of these frequencies can be combined to boost through one indoor antenna instead of each antenna serving each frequency thus reducing the numbers of antenna installed in a building.
Surge Rating: 18 kA
Frequency Range: DC to 6000MHz
VSWR < 1.1 to 1.1:4
Insertion Loss < 0.1 to 0.3 dB
Max Power Rating 200W Rep
Dimensions 68 x 21 x 33 mm
Frequency Range 698-806/806-960/1710-2700MHz
Gain 2.2±0.5/3.5±0.5/4.5±1.0
Polarization Horizontal
Networks: All Networks voice and data
Frequency Range 300-698-806/806-960/1710-2700-600 MHz
Gain 2.2±0.5/3.5±0.5/5.5±1.0
Angle: 360 º
Contact resistance:
inner conductor ≤ 3mΩ
outer conductor ≤ 2.5mΩ
Insulation resistance ≥5000 MΩ
Medium withstand voltage 1000V
The Crimp connector is designed for use with the standard 400 LMR coax cable.