Whip Aerial

Whip Aerial

Indoor Whip Aerial Antenna – Compact Indoor Signal Distribution for 2G/3G/4G

The Whip Aerial Antenna is a compact, indoor antenna specifically designed to distribute boosted mobile signals within enclosed spaces such as homes, offices, cabins, or shops. It delivers a signal gain of 3–5 dBi, providing reliable indoor coverage and improved call clarity and data speeds.

Operating across a wide frequency range of 698 to 2700 MHz, the whip aerial is fully compatible with all Wave Booster models that support 2G, 3G, and 4G voice and data signals. It’s an essential component of your mobile signal booster system, ensuring the amplified signal reaches your indoor devices effectively.

⚠️ Note: This antenna is intended for indoor use only and should not be used in outdoor installations.

Key Features & Benefits

•  Wide Frequency Range (698–2700 MHz): Supports all major UK and international mobile network bands for 2G, 3G, and 4G.

•  Compact & Discreet: Sleek design makes it perfect for indoor areas where space is limited or aesthetics matter.

•  Easy Installation: Plug-and-play setup with compatible connectors (N-type or SMA-type).

•  Reliable Signal Distribution: Helps evenly distribute the boosted signal indoors, improving reception on all mobile devices.

•  Universal Compatibility: Works with most repeater models in our Wave Boosters product line.

Connector Compatibility – Choose the Right Whip Antenna

When replacing or installing a whip aerial, it’s important to match the connector type of your signal booster. Here’s a quick reference to help:

Whip Aerial with N-Type Connector – For use with:

• WB Mini Dual Band

• WB 3G 2100 PRO

• WB Dual Band PRO

• WB GSM 900/3G PRO

Whip Aerial with SMA Connector – For use with:

• WB Mini GSM 900

• WB Mini GSM 1800

• WB GSM 900 PRO

• WB GSM 1800 PRO

If you’re unsure which model you own, check the connector port on the indoor unit or contact our support team for guidance.

Installation Instructions for Whip Aerial Antenna

Installing the whip aerial is simple and takes only a few minutes. Follow the steps below:

1. Locate the Indoor Port:

Identify the designated indoor antenna port on your mobile signal booster unit. It is usually labeled “Indoor” or marked with an antenna icon.

2. Choose the Correct Whip Antenna:

Make sure you’re using the correct connector type (either N-type or SMA-type) that matches your repeater model.

3. Connect the Antenna:

Carefully screw the whip aerial onto the indoor port of your booster. Ensure the connection is secure but do not over-tighten.

4. Adjust the Position:

Once connected, position the antenna vertically (pointing straight up) for best signal dispersion throughout the room. Avoid placing the antenna behind metal objects or in enclosed cabinets, as this may obstruct signal flow.

5. Test the Signal:

Power on the booster and allow it to optimize. Use your mobile phone to check signal strength in various spots around the room. For optimal results, place the booster unit with the whip aerial in a central indoor location.

Tips for Best Performance

• Position the booster and whip antenna at least 5–10 meters away from the outdoor antenna to avoid interference or oscillation.

• Avoid installing the whip aerial in areas with excessive metal or thick concrete, which may reduce signal efficiency.

• For larger buildings or multiple-room coverage, consider upgrading to a panel or ceiling-mounted indoor antenna for wider distribution.

Need Help Choosing the Right Antenna?

If you’re unsure about your model or connector type, our Technical Support Team is here to help you find the right whip aerial and ensure optimal performance for your signal booster setup