N-Male Crimp Connector
To terminate this at the end of any cables you need all the terminating kits (the Prep tool and the crimp tool) which can all be found on our accessories page.
£3
The Crimp connector is designed for use with the standard 400 LMR coax cable.
To terminate this at the end of any cables you need all the terminating kits (the Prep tool and the crimp tool) which can all be found on our accessories page.
This type of antenna is compatible with all our booster within their frequency range.
Contact resistance:
inner conductor ≤ 3mΩ
outer conductor ≤ 2.5mΩ
Insulation resistance ≥5000 MΩ
Medium withstand voltage 1000V
Compatible with all UK Frequencies LITE 800MHZ 900MHz, DCS 1800MHz, 3G UMTS 2100MHz, and /2600MHz, any three of these frequencies can be combined to boost through one indoor antenna instead of each antenna serving each frequency thus reducing the numbers of antenna installed in a building.
The WB – Whip aerial comes in two types, N-type white, and the SMA connection is available in black. The aerial should be fixed vertically to the repeater to achieve good results.
The Coaxial cable is crafted from a combination of superior material to stand even higher temperature, this gives the coaxial cable the ability to stand the test of time.
Frequency Range 698-806/806-960/1710-2700MHz
Gain 2.2±0.5/3.5±0.5/4.5±1.0
Polarization Horizontal
The Coax Prep Tool when used with the Crimp tool can perfectly terminate the ends on Coax cable with the required connectors.
Reviews
There are no reviews yet.