N-Male Crimp Connector
To terminate this at the end of any cables you need all the terminating kits (the Prep tool and the crimp tool) which can all be found on our accessories page.
£3 Incl. Vat
The Crimp connector is designed for use with the standard 400 LMR coax cable.
To terminate this at the end of any cables you need all the terminating kits (the Prep tool and the crimp tool) which can all be found on our accessories page.
The Coaxial cable is crafted from a combination of superior material to stand even higher temperature, this gives the coaxial cable the ability to stand the test of time.
This antenna is compatible with all UK Networks operating on the frequency range 824-960 / 1710-2700MHz.
Input:
100–240V AC, 50/60Hz (worldwide voltage support)
Output:
12V DC, 1.5A or 2A (depending on model)
This allows it to convert standard AC power from a wall outlet into the DC voltage required by the HiBoost signal booster. The wide input range also makes it compatible for international use.
Contact resistance:
inner conductor ≤ 3mΩ
outer conductor ≤ 2.5mΩ
Insulation resistance ≥5000 MΩ
Medium withstand voltage 1000V
AVAILABILITY: In stock
Compatible with all UK Frequencies LITE 800MHZ 900MHz, DCS 1800MHz, 3G UMTS 2100MHz, and /2600MHz, any three of these frequencies can be combined to boost through one indoor antenna instead of each antenna serving each frequency thus reducing the numbers of antenna installed in a building.
AVAILABILITY: In stock
AVAILABILITY: In stock
Surge Rating: 18 kA
Frequency Range: DC to 6000MHz
VSWR < 1.1 to 1.1:4
Insertion Loss < 0.1 to 0.3 dB
Max Power Rating 200W Rep
Dimensions 68 x 21 x 33 mm
AVAILABILITY: In stock
Select at least 2 products
to compare