N-Male Crimp Connector
To terminate this at the end of any cables you need all the terminating kits (the Prep tool and the crimp tool) which can all be found on our accessories page.
£3 Incl. Vat
The Crimp connector is designed for use with the standard 400 LMR coax cable.
To terminate this at the end of any cables you need all the terminating kits (the Prep tool and the crimp tool) which can all be found on our accessories page.
Input:
100–240V AC, 50/60Hz (worldwide voltage support)
Output:
12V DC, 1.5A or 2A (depending on model)
This allows it to convert standard AC power from a wall outlet into the DC voltage required by the HiBoost signal booster. The wide input range also makes it compatible for international use.
AVAILABILITY: In stock
Compatible with all UK Frequencies LITE 800MHZ 900MHz, DCS 1800MHz, 3G UMTS 2100MHz, and /2600MHz, any three of these frequencies can be combined to boost through one indoor antenna instead of each antenna serving each frequency thus reducing the numbers of antenna installed in a building.
Contact resistance:
inner conductor ≤ 3mΩ
outer conductor ≤ 2.5mΩ
Insulation resistance ≥5000 MΩ
Medium withstand voltage 1000V
Frequency Range 698-806/806-960/1710-2700MHz
Gain 2.2±0.5/3.5±0.5/4.5±1.0
Polarization Horizontal
AVAILABILITY: In stock
AVAILABILITY: In stock
This type of antenna is compatible with all our booster within their frequency range.
Networks: All Networks voice and data
Frequency Range 300-698-806/806-960/1710-2700-600 MHz
Gain 2.2±0.5/3.5±0.5/5.5±1.0
Angle: 360 º
This antenna is compatible with all UK Networks operating on the frequency range 824-960 / 1710-2700MHz.
This type of antenna is compatible with all our booster within their frequency range.
Select at least 2 products
to compare